RailDriver Desktop Train Cab Controller NOW supported in OpenBve

Page 2 of 2 Previous  1, 2

View previous topic View next topic Go down

Re: RailDriver Desktop Train Cab Controller NOW supported in OpenBve

Post by CaptED on Wed Aug 02, 2017 11:05 pm

More info on OpenBVE 2017-08-01...

When the RailDriver is disconnected the Keyboard is not working at all...
in other words I can not use the standard keys to operate a train...

Sound issue is not with the reverser when in Forward or Reverse only when it is centered...

Sound issue is NOT when "Power Handle in idle"  and "Brake Handle in Release".

Now when I tried other Routes and Trains...  Specifically Chashinai Railway and train 5000 series 4 & 6 cars
it simply re-set the game... Never did work ... 

Ed
avatar
CaptED

Posts : 59
Join date : 2012-08-19
Age : 73
Location : Bryant, Arkansas

Back to top Go down

Re: RailDriver Desktop Train Cab Controller NOW supported in OpenBve

Post by leezer3 on Thu Aug 03, 2017 9:25 pm

CaptED wrote:More info on OpenBVE 2017-08-01...

When the RailDriver is disconnected the Keyboard is not working at all...
in other words I can not use the standard keys to operate a train...

That is to be expected at present.
There's no way to set a control to both a keyboard and a joystick.

Adding a second copy of a control *may* work, but this is completely untested.

CaptED wrote:and what I mean is if you assign to the RD a button for starting the Engine.. it does not work,
nor does the Keyboard "E"

That's probably to be expected.
The Engine start key is a new addition, and will only be supported on trains running new .Net based plugins.
You'd need to assign the VirtualKey which the train uses by default to a RailDriver button, not the Engine Start key.

CaptEd wrote:When You have the sound turned on there is some sort of noise interference type, as you use either Power or Braking...

That sounds like electrical interference with your speakers/ headphones.
If so, there's not really much I can do here; Try changing the USB port the RailDriver is plugged into, and if you're using its headphones port, try directly into the PC.

I will test though, although I *don't* think think it's openBVE / my code causing it.

leezer3

Posts : 946
Join date : 2011-08-23

http://www.bvecornwall.co.uk

Back to top Go down

Re: RailDriver Desktop Train Cab Controller NOW supported in OpenBve

Post by CaptED on Thu Aug 03, 2017 10:12 pm

Hi Leezer3,

I will test the setup with different USB ports ...  It will take a couple days but will get back to you..
Thanks for your hard work on this project... 

Ed
avatar
CaptED

Posts : 59
Join date : 2012-08-19
Age : 73
Location : Bryant, Arkansas

Back to top Go down

Re: RailDriver Desktop Train Cab Controller NOW supported in OpenBve

Post by CaptED on Fri Aug 04, 2017 10:21 pm

Hi Leezer3,

The "some sort of Noise Interference"  turns out to be Clicking noise...

I re-assigned the Throttle lever to Increase  Power by one Notch for Trains with two handles...
and Decrease Power by one notch for Trains with two handles  (Which turned out to activate the Brake.)

The Clicking sound was heard while the reverser was in neutral , and stopped when put in forward position...

I also must put the Auto Brake & Independent Brake in Release position...

My thinking as of right now is the Clicking Sound is when the program is checking for Handle Position.
once in a positive position it stops clicking...

Going back and reassigning some of the Handles and see if I can figure out the best way ...

Ed
avatar
CaptED

Posts : 59
Join date : 2012-08-19
Age : 73
Location : Bryant, Arkansas

Back to top Go down

Re: RailDriver Desktop Train Cab Controller NOW supported in OpenBve

Post by Sponsored content


Sponsored content


Back to top Go down

Page 2 of 2 Previous  1, 2

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum