Victoria LIne v4 for Openbve

View previous topic View next topic Go down

solved Victoria LIne v4 for Openbve

Post by johng42 on Wed Mar 20, 2013 3:13 pm

Has any user of the above underground route managed to find a Driver Guide? As a newbie to openbve I am having great difficulty using the route, which renders in virtual darkness. There must be a way of shedding some light onto the cab controls!
johng42


Last edited by Northern Line on Mon Mar 25, 2013 12:03 pm; edited 1 time in total (Reason for editing : Case Closed ;))

johng42

Posts : 12
Join date : 2013-03-20

Back to top Go down

solved Re: Victoria LIne v4 for Openbve

Post by Northern Line on Sun Mar 24, 2013 3:11 pm

Well for LU cab controls when you start the route:

Z = Power
A = Neutral (No power or braking applied/Coasting)
Q = Brake

F = Reverser Forward Position
N = Off Position
B = Reverser in the Reverse Position (To go backwards)

Right when you start the route and spawned at the station, Put the reverser into the forward position, then close the doors (F6). Once the doors are closed, Press the Z key to take it out of Brake and into Power notch 3. The train should start moving.

To slow the train down, press Q to put it into the brake notch and adjust accordingly.

For the problem if the dark nothingness tunnel, check that the victiria line v4 folder is in the objects folder. It will mot work without this format. check the portal for info.
avatar
Northern Line

Posts : 281
Join date : 2011-07-12
Age : 23
Location : Tooting, London, England

http://www.bve-district.co.uk/

Back to top Go down

solved Re: Victoria LIne v4 for Openbve

Post by johng42 on Sun Mar 24, 2013 10:04 pm

Thanks Northern Line. My problem is that the cab is in darkness and I cannot see speed gauge or the platform stop indicator. I am running openbve on Linux Ubuntu 12.10 and the route runs perfectly well except for the cab lights. Any advice would be welcome
Johng42

johng42

Posts : 12
Join date : 2013-03-20

Back to top Go down

solved Re: Victoria LIne v4 for Openbve

Post by Northern Line on Sun Mar 24, 2013 10:54 pm

Im afraid I'm not running linux to solve this problem, but I do hope that anyone who has had this problem could help Smile
avatar
Northern Line

Posts : 281
Join date : 2011-07-12
Age : 23
Location : Tooting, London, England

http://www.bve-district.co.uk/

Back to top Go down

solved Re: Victoria LIne v4 for Openbve

Post by johng42 on Mon Mar 25, 2013 9:59 am

Solved! I need to use the 2d cab. Now dials are visible. Thanks
johng

johng42

Posts : 12
Join date : 2013-03-20

Back to top Go down

solved Re: Victoria LIne v4 for Openbve

Post by Northern Line on Mon Mar 25, 2013 12:02 pm

Great Smile
avatar
Northern Line

Posts : 281
Join date : 2011-07-12
Age : 23
Location : Tooting, London, England

http://www.bve-district.co.uk/

Back to top Go down

solved Re: Victoria LIne v4 for Openbve

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum