Object Bender not working for me

View previous topic View next topic Go down

Object Bender not working for me

Post by RysX on Sat Jan 12, 2013 12:00 am

I'm trying out Object Bender in command mode and i'm using it to batch process curved rails. I'm not sure if this is correct as it doesn't produce the files when it's done.
Code:
ObjectBender Base.csv Std300L.csv /n=25 /s=1 /b=25 /r=-300
ObjectBender Base.csv Std300R.csv /n=25 /s=1 /b=25 /r=300
ObjectBender Base.csv Std400L.csv /n=25 /s=1 /b=25 /r=-400
ObjectBender Base.csv Std400R.csv /n=25 /s=1 /b=25 /r=400
ObjectBender Base.csv Std500L.csv /n=25 /s=1 /b=25 /r=-500
ObjectBender Base.csv Std500R.csv /n=25 /s=1 /b=25 /r=500
ObjectBender Base.csv Std600L.csv /n=25 /s=1 /b=25 /r=-600
ObjectBender Base.csv Std600R.csv /n=25 /s=1 /b=25 /r=600
ObjectBender Base.csv Std900L.csv /n=25 /s=1 /b=25 /r=-900
ObjectBender Base.csv Std900R.csv /n=25 /s=1 /b=25 /r=900
ObjectBender Base.csv Std1200L.csv /n=25 /s=1 /b=25 /r=-1200
ObjectBender Base.csv Std1200R.csv /n=25 /s=1 /b=25 /r=1200
ObjectBender Base.csv Std1400L.csv /n=25 /s=1 /b=25 /r=-1400
ObjectBender Base.csv Std1400R.csv /n=25 /s=1 /b=25 /r=1400

Thanks for any help!

RysX

Posts : 1
Join date : 2012-12-04

Back to top Go down

Re: Object Bender not working for me

Post by graymac on Sat Jan 12, 2013 1:47 pm

No, not for me either. I tried it to make a 125m curved rail in one object, to no avail. I hand coded the lot in the end, though making a curved item having the same radius as my wanted item, using the Switch program, helped me get the offsets I needed.
avatar
graymac

Posts : 1741
Join date : 2011-08-28
Location : Co Mayo, Eire

http://www.celtictrainsim.com

Back to top Go down

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum