Red Trip Timer Signals BVE/OpenBVE

View previous topic View next topic Go down

Red Trip Timer Signals BVE/OpenBVE

Post by waterburn on Fri Jun 29, 2012 1:37 am

Is there any way to make the red signals (which are animated custom ones) actually trip the trains in BVE/openBVE?

I am using this signals pack: http://bvestation.com/downloadinfo.php?id=61

waterburn

Posts : 54
Join date : 2012-06-29

Back to top Go down

Re: Red Trip Timer Signals BVE/OpenBVE

Post by Drag0nflamez on Sat Jul 14, 2012 7:18 pm

Need a compatible train. Not sure which ones are compatible, though.

Drag0nflamez

Posts : 203
Join date : 2012-05-11
Location : The Netherlands

Back to top Go down

Re: Red Trip Timer Signals BVE/OpenBVE

Post by alvinhochun on Sun Jul 15, 2012 1:54 pm

This depends on what signalling system (and corresponding train plugin) that you use. The default (built-in) ATS-SN or ATS-P or ATC can do that, or if you need UK signalling you can check for this (http://railsimroutes.net/libraries/uktrainsys/index.php)

The signalling system in openBVE is a composition of Track.Section and Track.Signal commands and it generates information for train plugins to perform corresponding operations. Those you provided should be only a visible representation of the signal that is generated by openBVE
avatar
alvinhochun

Posts : 88
Join date : 2012-05-08
Location : Hong Kong

Back to top Go down

Re: Red Trip Timer Signals BVE/OpenBVE

Post by waterburn on Sat Aug 04, 2012 12:25 am

How about a system similar to the one used by the signals pack?

waterburn

Posts : 54
Join date : 2012-06-29

Back to top Go down

Re: Red Trip Timer Signals BVE/OpenBVE

Post by waterburn on Sun Nov 11, 2012 4:56 pm

The animated signals use the .sigf command - there is no connection with the signal command. As far as openbve is concerned the timer signals are just animated objects. How can I get the beacons or transponders to detect the state of the animations to stop the train if in the RED state. Any ideas??

waterburn

Posts : 54
Join date : 2012-06-29

Back to top Go down

Re: Red Trip Timer Signals BVE/OpenBVE

Post by Drag0nflamez on Mon Nov 12, 2012 8:51 am

waterburn wrote:The animated signals use the .sigf command - there is no connection with the signal command. As far as openbve is concerned the timer signals are just animated objects. How can I get the beacons or transponders to detect the state of the animations to stop the train if in the RED state. Any ideas??
Not sure how BVEStation does that, try waiting for the (F) 5.00 or else OpenBVE clearly needs some upgrading.

Drag0nflamez

Posts : 203
Join date : 2012-05-11
Location : The Netherlands

Back to top Go down

Re: Red Trip Timer Signals BVE/OpenBVE

Post by waterburn on Tue Nov 13, 2012 2:12 am

I figured it out using speed check beacons from Odakyufan's custom Ats plugin: http://odakyufan.zxq.net/odakyufanats/atssx.html. Apparently it only works for openBVE though.

waterburn

Posts : 54
Join date : 2012-06-29

Back to top Go down

Re: Red Trip Timer Signals BVE/OpenBVE

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum