How to setup the pro throttle with BVE

View previous topic View next topic Go down

How to setup the pro throttle with BVE

Post by jtsako on Tue Mar 07, 2017 5:39 pm

Just purchased the Pro Throttle for Open BVE. Not sure how to set up the throttle commands.
can you please advise.
Thank You Jim

jtsako

Posts : 6
Join date : 2016-12-14

Back to top Go down

Re: How to setup the pro throttle with BVE

Post by leezer3 on Wed Mar 08, 2017 11:53 am

Hopefully it should appear as a joystick in the openBVE settings page.

If so:
1. Center all joystick axis.
2. Press the 'Add Control'  button.
3. Select one of the following from the dropdown: SINGLE_FULLAXIS, POWER_FULLAXIS, BRAKE_FULLAXIS
4. Change the radio button to 'joystick'
5. Click in the joystick grab box with your mouse.
6. Move your desired axis.

You can obviously also do this with any other control, selecting a button instead Smile

leezer3

Posts : 895
Join date : 2011-08-23

http://www.bvecornwall.co.uk

Back to top Go down

Re: How to setup the pro throttle with BVE

Post by jtsako on Wed Mar 08, 2017 8:38 pm

lezzar3,
Thanks for your reply. Will try what your suggesting.

Jim

jtsako

Posts : 6
Join date : 2016-12-14

Back to top Go down

Re: How to setup the pro throttle with BVE

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum